Videotec DCZ Manuel d'utilisateur télécharger pdf (Page 19)

EN - English - Instructions manual

9.7.2.2 Reduced modiﬁcations to the

joystick default settings

Example: If you want to maintain most of the central

group of keys, move key 1, create a double key for

number 2.

OPERATION / COMMAND EFFECT

Enter the programming settings

Select 5 . Resets the JOYHID key

chart to default settings.

Disconnect and reconnect the

keyboard.

It restarts in JOYHID mode.

Enter the programming settings again

Select 7 . It switches to VCOM mode

without resetting the

joystick lookup chart.

Disconnect and reconnect the

keyboard.

It restarts in VCOM mode.

[BlockModeStart]

Command.

This allows you to

modify the internal

memory without using

it for multiple writing

commands.

[LookupWrite34,0]

Command.

Cancels key 1 from the

default position (row 3,

column 4)

[LookupWrite31,60001]

Command.

Assigns key 1 (60001) to

the key on row 3, column 1.

[LookupWrite32,60002]

Command.

Creates a second 2 key on

row 3, column 2.

[BlockModeEnd]

Command.

Saves the modiﬁcations to

the internal memory.

Enter the programming settings

Select 8 . Switches to JOYHID mode

without resetting the

lookup chart that has just

been modiﬁed.

Disconnect and reconnect the

keyboard.

It restarts in JOYHID mode.

Check that the corresponding

LEDs come on when the keys

are pressed.

Tab. 06

9.7.2.1 Creating shift keys in VCOM mode

The keyboard can have up to 8 shift keys, used to

change the behaviour of ordinary keys.

Example: Transform key 86 into shift key number 1,

and key 87 into shift key number 7.

OPERATION / COMMAND EFFECT

Enter the programming settings

Select 4 . It switches to VCOM mode

resetting the joystick

lookup chart.

Disconnect and reconnect the

keyboard.

It restarts in VCOM mode

[BlockModeStart]

Command.

This allows you to

modify the internal

memory without using

it for multiple writing

commands.

[LookupWrite86,1001]

Command.

Creates the shift key 1

changing the behaviour of

key on row 8, column 6.

[LookupWrite87,1007]

Command.

Creates the shift key 7

changing the behaviour of

key on row 8, column 7.

[BlockModeEnd]

Command.

Saves the modiﬁcations to

the internal memory.

Tab. 05

To check the correct deﬁnition of the shift keys:

• Press ESC (key 1,3) without any shift key: The

keyboard sends the code [K+13];

• Press INFO (key in line 8, column 6, deﬁned as

shift number 1) and ESC : The key sends the code

[K+13:1]. The shift keys that have been pressed

are identiﬁed by the colon;

• Press SHIFT (arrow-up symbol, key in line 8,

column 7, deﬁned as shift number 7) and ESC :

The keyboard sends the code [K+13:7];

• Press INFO , SHIFT and ESC : The keyboard

sends the code [K+13:17].

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 91 92

Commentaires sur ces manuels

Pas de commentaire

Videotec DCZ Manuel d'utilisateur Page 19

Commentaires sur ces manuels

Produits connexes et manuels pour Sécurité Videotec DCZ