Videotec DCZ Manuel d'utilisateur télécharger pdf (Page 20)

EN - English - Instructions manual

9.7.3 Modiﬁcations to the lookup chart

to deﬁne alias keys

It is possible to have several keys that all perform the

same commands (e.g. the shift keys). If a series of

alias keys are pressed together at the same time, the

pressed key event ([K+xx]) is only transmitted the

ﬁrst time it is pressed; the released key event ([K-

xx]) is only transmitted when all the keys with the

same alias have also been released.

Example: The 5 bottom keys on the keyboard act as if

they are the same key.

OPERATION / COMMAND EFFECT

Enter the programming settings

Select 4 . Switches to VCOM mode

resetting the lookup chart.

Disconnect and reconnect the

keyboard.

It restarts in VCOM mode.

[BlockModeStart]

Command.

This allows you to

modify the internal

memory without using

it for multiple writing

commands.

[LookupWrite84,50083]

Command.

The key on row 8, column

4, is an alias of the key on

row 8, column 3.

[LookupWrite85,50083]

Command.

The key on row 8, column

5, is an alias of the key on

row 8, column 3.

[LookupWrite86,50083]

Command.

The key on row 8, column

6, is an alias of the key on

row 8, column 3.

[LookupWrite87,50083]

Command.

The key on row 8, column

7, is an alias of the key on

row 8, column 3.

[BlockModeEnd]

Command.

Saves the modiﬁcations to

the internal memory.

Enter the programming settings

Check that when the 5 lower

keys are pressed, they all

transmit the same message

[K+83].

Tab. 08

9.7.2.3 Substantial modiﬁcations to the

joystick default settings

Example: If you want to use just 8 joystick keys on

the left side of the keyboard.

OPERATION / COMMAND EFFECT

Enter the programming settings

Select 5 . Resets the JOYHID key

chart to default settings.

Disconnect and reconnect the

keyboard.

It restarts in JOYHID mode.

Enter the programming settings again

Select 4 . It switches to VCOM mode

resetting the lookup chart

(no keys valid for the

joystick).

Disconnect and reconnect the

keyboard.

It restarts in VCOM mode.

[BlockModeStart]

Command.

This allows you to

modify the internal

memory without using

it for multiple writing

commands.

[LookupWrite31,60001]

Command.

Creates key 1 on row 3,

column 1.

[LookupWrite32,60002]

Command.

Creates key 2 on row 3,

column 2.

[LookupWrite41,60003]

Command.

Creates key 3 on row 4,

column 1.

[LookupWrite42,60004]

Command.

Creates key 4 on row 4,

column 2.

[LookupWrite51,60005]

Command.

Creates key 5 on row 5,

column 1.

[LookupWrite52,60006]

Command.

Creates key 5 on row 5,

column 2.

[LookupWrite61,60007]

Command.

Creates key 7 on row 6,

column 1.

[LookupWrite62,60008]

Command.

Creates key 8 on row 6,

column 2.

[BlockModeEnd]

Command.

Saves the modiﬁcations to

the internal memory.

Enter the programming settings

Select 8 . Switches to JOYHID mode

without resetting the

lookup chart that has just

been modiﬁed.

Disconnect and reconnect the

keyboard.

It restarts in JOYHID mode.

Check that the corresponding

LEDs come on when the keys

are pressed.

Tab. 07

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 91 92

Commentaires sur ces manuels

Pas de commentaire

Videotec DCZ Manuel d'utilisateur Page 20

Commentaires sur ces manuels

Produits connexes et manuels pour Sécurité Videotec DCZ